How to photograph the Milky Way: A guide for beginners and enthusiasts – Space.com

By 27 September 2021
Create stunning night sky images by learning to photograph the Milky Way like a pro.
Learning the tricks and techniques for how to photograph the Milky Way isn’t as difficult as it first seems. When you first start taking pictures of the night sky you’re likely to see those amazing pictures of the Milky Way glistening brightly, fronted by an amazing mountain range or landmark and think “I’ll never be able to take anything like that”… but it is easier than you imagine.  With a bit of planning and practice anyone with a camera can capture the Milky Way but be warned, running around in the dark chasing a new Milky Way shot can become quite addictive!
There are many techniques to advance your Milky Way shooting but this guide will get you up and running. There aren’t too many differences between shooting the Milky Way and regular astro, although the timings and direction you shoot in need to be considered.
These days it is even possible to capture the night sky with a phone camera but for this guide we will focus (excuse the pun) on using a standard interchangeable lens camera.  When we are teaching new night sky shooters they are always asked to bring 5 things:
We recommend a wider lens for beginners, as they're generally easier to work with in astrophotography.
OK, now you have your kit together you also need to do some basic planning. You will need: a clear sky, a dark sky location, and Milky Way visibility.
The Milky Way Season is generally considered to be February to October.  There are lots of nuances and factors that affect the visibility depending on your location and the time of year but we’d recommend using an app such as Photopills, Star Walk 2, SkySafari 6 Pro, or Stellarium to pick the right time based on your location. In general the Milky Way Core will be to the south so keep that in mind when planning your shot.
Next you need a dark site (e.g. as little light pollution as possible), and there are various websites that can help with this such as Dark Site Finder and Light Pollution Map
Finally, you just need a clear sky, so keep an eye on all those weather forecasts!
How to shoot the Milky Way
Before heading out into the field to get your first shot, it is good to do some basic set-up at home.  
First, set your camera to Manual mode, make sure you are shooting in RAW and turn your screen brightness down to a minimum.
Next I always advise people to practice the basic process in the dark in their garden/close to home before heading out. We have a beginners guide to astrophotography if you need the basics.
Mount your camera on the tripod and practice focusing on the stars in the dark. Most cameras can’t autofocus on the stars, so you will need to learn to manual focus, which is probably the hardest thing to master and can be quite a barrier for some people. The basic idea is to pick a bright star (or very distant light), use any sort of focus zoom you can (most cameras have this) and adjust the focus until the star/light appears as small as possible.  Alternatively, if you know the exact infinity focus point on your lens you could use that. Remember when you are using a zoom lens, if you change the focal length you will need to refocus!
Milky Way Photography
This is tricky to advise as it will be dependent on your exact set-up, but most importantly you need to always use the widest/fastest (lowest number) aperture. Assuming you are using a wide lens, around f/2 and you are in an area with a little light pollution then we would recommend starting with f/2, ISO 3200 and 15 seconds.
The ISO can be adjusted up or down, but ISO 1600-6400 is usually used by Milky Way shooters, remembering the higher the ISO the more noise you will get. We have a guide to reducing noise in astrophotography, if you need it.
The shutter speed is important; if you leave the shutter open for too long then the stars will start to trail (especially at the edges of the frame).  You can use the NPF rule to calculate your ideal shutter speed for your set-up, and there is a handy calculator built into the Photopills app. Alternatively a little trial and error can be applied – keep adjusting the shutter speed and checking the resulting picture. Zoom in and as soon as the stars become ovals you have gone too far.
How to photograph the Milky Way
Once you have all your gear ready, you know when and where you are heading to, and the conditions are right, it is time to put it all together.
If you can, get on site during daylight hours to scout out your spot and get set-up safely. Set up your tripod, ensuring the legs are securely locked in position, mount your camera, connect your shutter release and again check everything is secure. 
When the stars are visible, perform your focusing steps and then compose your final shot. Composing your shot in the dark can also be very challenging, by temporarily setting the ISO very high (ISO 12,000) you can take a quick (2-3 sec) test shot to check your focus and composition.
Finally, dial in your main settings and shoot. Review the image for pin sharp stars, make sure they are not blurry (re-focus) or ovals (increase shutter speed).  Also don’t forget the basics like straight horizons and using the histogram.  
Night sky image over circle of stones
Once you have a few shots in the bag it’s time to head home and do some editing, as with most elements of night sky shooting there are many techniques you can utilize at this step but here are the basics we always start with. Remember editing is very much a personal preference, so do not be afraid to experiment.
The first thing to do after importing files is adjust the white balance. Somewhere between 4000k-5000K usually works well (with some cameras you can manually adjust the K of the white balance as you shoot, if you’d prefer). You will almost certainly need to increase the exposure, and we usually find shots need a 1-2 stops increase.
We usually decrease the highlights and increase the contrast and shadows a little.  If you are comfortable using radial gradients then they can be fantastic for adding some extra touches to the Milky Way. Try adjusting the clarity, dehaze and whites to make the Milky Way pop a bit more. Remember that the Milky Way is meant to be white, so if you’re trying to retain the proper colors, don’t go crazy with any color adjustments.
Also, if you are an Adobe Lightroom user, try using RAW profiles (the “Modern” profiles are good for Milky Ways) to get a start.
How to photograph the Milky Way
Join our Space Forums to keep talking space on the latest missions, night sky and more! And if you have a news tip, correction or comment, let us know at: [email protected]
Family man Tom lives in Bournemouth on the south coast of England. As an Olympus OM-D Mentor and Astrophotography workshop/webinar leader he spends a large amount of time sharing his knowledge and passion for the night sky and landscape photography.  Tom is well known for his enthusiasm and friendliness, encouraging the social side of photography as much as the creative and technical aspects.
Get breaking space news and the latest updates on rocket launches, skywatching events and more!
Thank you for signing up to Space. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Space is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site.
© Future US, Inc. 11 West 42nd Street, 15th Floor, New York, NY 10036.

source